Enable the Brother machine's network interface. Print a Printer Settings page. Important points you need to confirm before configuring your Brother machine for a wireless network. Setup a Brother machine on a wireless (Wi-Fi) network using the supplied CD-ROM without a USB cable.

Moreover, how do I connect my Brother HL 1212w printer to my WiFi?

Press the WPS or AOSS™ button on your wireless LAN access point/router. Press and hold the WiFi button on your machine for about 2 seconds. The WiFi button will light up when connected.

One may also ask, how do I connect my Brother HL l2350dw printer to WiFi? Press the Up or Down arrow key to select the following:

  1. Select Network. Press OK.
  2. Select WLAN. Press OK.
  3. Select Setup Wizard. Press OK.

One may also ask, how do I get my Brother printer to connect to WiFi?

To set up your Brother machine on a wireless network:

  1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
  2. Press Menu button on the machine's control panel.
  3. Press the Up or Down arrow key to select Network and press OK.
  4. Press the Up or Down arrow key to select WLAN and press OK.

Where is WPS pin on Brother printer?

Press Network. Press WLAN. to display WPS w/PIN Code, and then press WPS w/PIN Code. The LCD will show an 8 digit PIN and the machine starts searching for an access point for 5 minutes.

Related Question Answers

How do I change my Brother printer from USB to wireless?

Connect the printer and your computer with a USB cable. Start the Printer Setting Tool, and click the [Communication Settings] button. Select [Wireless LAN] for [Selected Interface] in the [General] tab, and select [Ad-hoc] for [Communication Mode] in [Wireless Settings] in the [Wireless LAN] tab.

How do I reset my Brother HL 1210w printer?

First method:
  1. Turn off the BROTHER HL-1210W by clicking Power Button.
  2. Make sure that the top cover is closed and the power cord is plugged in.
  3. While holding down BROTHER HL-1210W Power Key, open and close the top cover once.
  4. Release Power Button, make sure that all the LEDs turn off.
  5. Press power key ten times.
  6. Good Job!

Why is my Brother printer not connecting to WIFI?

1- First Restart Your Router And Brother Printer ( if possible Your Computer Too). 2- Make sure You have the right password for Your printer. 3- You Can Try WPS Key to Connect your Printer with Router if your router and printer do have a WPS key.

How do I connect my printer via WIFI?

Make sure you know your network name and your security password (WEP, WPA, or WPA2). On the printer's control panel, go to the Network menu or touch the wireless icon and then go to settings. Select Wireless Setup Wizard. The Wireless Setup Wizard displays a list of wireless networks in the area.

How do I reset the wifi on my Brother printer?

How to reset the WIFI connection on your Brother printer
  1. Press the 'menu' button on the control panel (if you have a touchscreen select 'Settings' or 'Spanner & Screwdriver icon' then select 'All settings')
  2. Using the arrow keys, scroll down to 'Network' then press 'OK'
  3. Using the arrow keys, scroll down to 'Network Reset' then press 'OK'
  4. Press '1' to say yes.

How do I connect my Brother printer to my computer via USB?

Connect one end of your USB cable to the port on your Brother printer, and then connect the opposite end of the USB cable to an available port on your computer. USB ports are usually located at the rear of your computer near the audio jacks and power cable.

How do I setup my Brother HL 2270dw wireless printer?

Configure the wireless settings:
  1. Place the Brother machine within range of your WPS or AOSS™ access point/router.
  2. Make sure that the power cord is plugged in.
  3. Turn on the machine and wait until the machine is in the Ready state.
  4. Hold down the WPS or AOSS™ button on your WLAN access point/router for a few seconds.

How do I connect my Brother printer to my computer?

Know-How to Connect Brother Printer to Computer and Laptop:
  1. First of all, you would need to download the printer driver for your computer and then go to the official Brother Printer website.
  2. Now click on Downloads link.
  3. Choose Printer under the Select Product Group category.
  4. Click on View option to continue the process.

What is WIFI Direct Brother printer?

Wi-Fi Direct™ is one of the wireless configuration methods developed by the Wi-Fi Alliance®. It allows you to. configure a secured wireless network between your Brother machine and a mobile device, such as an. Android™ device, Windows® Phone device, iPhone, iPod touch or iPad, without using an access point.

How do I get my Brother printer to print?

  1. Select the Printer Driver from the [Downloads] section of this website, and then install it.
  2. Open the document you want to print.
  3. Turn the printer on.
  4. Connect the printer to a computer using USB, Bluetooth® or Wi-Fi®.
  5. Load paper.
  6. Print from the application.
  7. Turn the printer off.

How do I log into my Brother printer?

Type " IP address" in your browser's address bar (where "machine's IP address" is the IP address of the machine or the print server name). In the Login field, type the default login password. Click the Administrator tab. *If you do not find Administrator tab, click the Login Password.

How do I connect my Brother HL l2360dw printer to my WiFi?

To set up your Brother machine on a wireless network:
  1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
  2. Press the Up or Down arrow key to select the Network option and press OK.
  3. Press the Up or Down arrow key to select the WLAN option and press OK.