HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
  1. Load your document.
  2. Press. (SCAN).
  3. Press or. to select the [Scan to PC] option, and then press OK.
  4. Press or.
  5. If the machine is connected over the network, press or.
  6. Press OK.
  7. Do one of the following:
  8. Select the scan settings you want to change:

Similarly, it is asked, how do I setup my Brother HL l2390dw?

How to Connect Brother HL-L2390DW Printer to Wifi

  1. Power on your router and check if it provides an active internet.
  2. Turn on your Brother HL-L2390DW printer by force pressing its power button.
  3. On the function panel of the Brother HL-L2390DW setup printer, tap the Menu or Settings icon.
  4. Pick Network and tap OK.

Also, can the Brother HL l2370dw scan? Best answer: No. It is just a printer. No copy. No scan.

Beside this, how do I scan on my Brother HL l2390dw?

HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW

  1. Load your document.
  2. Press. (SCAN).
  3. Press or. to select the [Scan to PC] option, and then press OK.
  4. Press or.
  5. If the machine is connected over the network, press or.
  6. Press OK.
  7. Do one of the following:
  8. Select the scan settings you want to change:

How do I connect my Brother laser printer?

To set up your Brother machine on a wireless network:

  1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
  2. Press Menu button on the machine's control panel.
  3. Press the Up or Down arrow key to select Network and press OK.
  4. Press the Up or Down arrow key to select WLAN and press OK.

Related Question Answers

Where do you find the WPS PIN on your Brother printer?

Press Network. Press WLAN. to display WPS w/PIN Code, and then press WPS w/PIN Code. The LCD will show an 8 digit PIN and the machine starts searching for an access point for 5 minutes.

How do I connect my Brother printer to my laptop?

Learn How to Connect Brother Wireless Printer to Laptop and Computer:
  1. First of all, turn on your laptop and router.
  2. Now power on your Brother Printer and then go to the menu by using the control panel of the touch screen.
  3. Go to the Network section and then click on WLAN.
  4. Click on Setup Wizard.

How do I setup my Brother HL 2170w wireless printer?

Configure the wireless settings:
  1. Place the Brother machine within range of your WPS or AOSS™ access point/router.
  2. Make sure that the power cord is plugged in.
  3. Turn on the machine and wait until the machine is in the Ready state.
  4. Hold down the WPS or AOSS™ button on your WLAN access point/router for a few seconds.

Why is my Brother printer not connecting to WIFI?

1- First Restart Your Router And Brother Printer ( if possible Your Computer Too). 2- Make sure You have the right password for Your printer. 3- You Can Try WPS Key to Connect your Printer with Router if your router and printer do have a WPS key.

Where is the IP address on my Brother printer?

Press the [Menu] and navigate to the WLAN tab (using the ?/? arrows and the [OK] button) Press ? and select WLAN Status. Select Infrastructure Mode. The screen will display your network connection settings, your IP Address is listed on the third line.

How do I change the toner on my Brother HL l2390dw?

How to replace the drum unit:
  1. Make sure that the printer is on and press open the front cover.
  2. Remove the toner cartridge and drum unit from the machine.
  3. Push down the green lock lever and remove the toner cartridge from the drum unit.
  4. Unpack the new drum unit.

How do I change the toner on my Brother printer HL l2390dw?

FAQs & Troubleshooting
  1. Make sure the machine is turned on.
  2. Open the front cover.
  3. Remove the toner cartridge and drum unit assembly from the machine.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new toner cartridge.
  6. Remove the protective cover.

How do I get my Brother printer to scan?

Method 1: Windows FAX and Scan
  1. Load your document on to your Brother machine.
  2. (Windows 8)
  3. Click Windows Fax and Scan.
  4. Click New Scan.
  5. If you have multiple imaging devices installed on your computer, choose your scanner and click OK.
  6. Set scanning options, and then click Scan.
  7. The scanned image will be displayed.

How do I set the date and time on my Brother printer?

Set the date and time.
  1. Press. (Settings) > All Settings > Initial Setup > Date & Time > Date.
  2. Enter the last two digits of the year using the LCD, and then press OK.
  3. Enter the two digits for the month using the LCD, and then press OK.
  4. Enter the two digits for the day using the LCD, and then press OK.
  5. Do one of the following:
  6. Press.

Does the Brother HL l2390dw print in color?

Design. The HL-L2390DW forgoes fancy appearances. For starters, it has a simple two-line, backlit, monochrome LCD, not a color touch screen.

How do I set up scanning on my Brother MFC?

STEP A: Configure the Scan to File feature
  1. Open the ControlCenter. Brother Utilities supported models. Open Brother Utilities.
  2. Open Device Scan Settings window. In Home Mode: Click Device Settings tab > Device Scan Settings.
  3. The Device Scan Settings window will appear. Click the File tab and select PDF(*.
  4. Go to STEP B.

How do I scan with MFC l2750dw?

HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
  1. Load your document.
  2. Press [Scan]>[to PC]>[to File].
  3. If the machine is connected over the network, press or.
  4. Do one of the following:
  5. To scan both sides of the document (MFC-L2750DW/MFC-L2750DWXL):
  6. Select the scan settings you want to change:
  7. Press [OK].
  8. Press [Start].

How do I scan with my Brother MFC l2720dw?

In Home Mode: Click Device Settings tab > Device Scan Settings. In Advanced Mode: Click Device Settings tab > Device Scan Settings.

For Windows

  1. Open Brother Utilities. Windows 7 / 10. Click or. (Start) > (All Programs or All apps >) Brother > Brother Utilities.
  2. Select Scan.
  3. Click ControlCenter4.

How do I scan multiple pages into one PDF on a Brother printer?

  1. Click on Configuration -> SCAN.
  2. Choose the type of scan you require.
  3. The Scan to configuration window will appear.
  4. The Software Button tab configures the Scan to button within the ControlCenter software interface.
  5. Under File Type choose an option that allows multi-page documents:
  6. Click OK.

How do I download and install control center 4?

How to download and install the ControlCenter4 Update tool
  1. Locate the file you downloaded CC4Updater and double-click on it.
  2. If prompted with a security warning, click Yes or Run.
  3. Once the decompression is complete, click OK.
  4. Close the Brother ControlCenter4 program if it is running.
  5. Locate and double-click on the decompressed file labeled ControlCenter4 Updater.exe.

How do I use Brother Internet Connect?

Start Brother Web Connect access using a computer and obtain a temporary ID. Enter the temporary ID to enable the service on the machine. Specify the account name as you would like it to be displayed on the machine, and enter a PIN code if you would like to use one. The machine can now use the service.

Does the Brother HL l2350dw scan?

*The scan functions of Brother iPrint&Scan are only available if the machine has a scanner.

What does HL stand for Brother?

high yield

How do you copy on a Brother printer?

Making a single copy:
  1. Lift the document cover.
  2. Place the document you want to copy face down on the flat scanner glass. Use the document guide lines in the upper-left corner of the flat scanner glass to help you position your document.
  3. Close the document cover.
  4. Go to STEP3.

How do I connect my Brother HL l2370dw printer to my laptop?

How to Setup Brother HL L2370DW Wireless
  1. Download and launch the Brother HL-L2370DW printer on your computer or laptop.
  2. Once you download the driver, double-click on it to start the installation process.
  3. Go through the guidelines on the screen.
  4. Configure the connection method as wireless while installing the driver.

How do I stop my Brother printer from going to sleep?

To turn Sleep Mode off, follow these steps: Press the START and OPTIONS keys simultaneously. The LCD will read "Sleep Mode: On." Press the UP OR DOWN ARROW key to choose Off.

How do you fix a drum on a Brother printer?

Replacing the drum unit
  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Remove the toner cartridge and drum unit assembly from the machine.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new drum unit.

What is a monochrome printer?

A monochrome printer is any type of printer that prints using black ink only. Monochrome printers are typically used in professional environments due to their faster printing speed, lower cost per printed page, and in the case of monochrome laser printers, superior text quality.

Why is my brother scanner not connecting to my computer?

If your machine is connected using a network connection, and the issue only occurs when scanning from the "Scan to" option on your machine, then the issue is caused by the computer having two or more active network connections. A firewall or security application may be blocking your Brother machine's communication.

How do I connect my Brother printer to my computer via USB?

Connect one end of your USB cable to the port on your Brother printer, and then connect the opposite end of the USB cable to an available port on your computer. USB ports are usually located at the rear of your computer near the audio jacks and power cable.

How do I connect my Brother printer to my phone?

Android™
  1. Tap the Settings icon.
  2. Tap Wi-Fi.
  3. If your Wi-Fi is turned Off, turn it On.
  4. Find the SSID you wrote down earlier, and then tap it.
  5. Enter the network key (password) you wrote down earlier, and then tap CONNECT.
  6. The wireless connection setup is complete if Connected appears under the SSID name selected earlier.

How do I connect my wireless Brother printer to my laptop?

How can I print wirelessly from a computer using a wireless router/access point? (Infrastructure mode)
  1. Connect your computer to your wireless router/access point.
  2. Connect your Brother printer to the same wireless router/access point.
  3. Connect your Brother printer and your computer.

How do I connect my Brother printer to my laptop without the CD?

Brother Printer Installation with USB Cable
  1. Plug in the printer, and switch it on.
  2. Now, insert the USB cable in the USB jack of computer and printer.
  3. On the computer, go to start button and click it.
  4. Now click on devices and printers.
  5. On the top there is an option, Add a printer.

How do I connect my Brother printer to Windows 10?

  1. Click Start → (All apps).
  2. Click Windows System.
  3. Click Control Panel.
  4. Click View devices and printers.
  5. Click Add a printer.
  6. Select your Brother printer from the list and then click Next.
  7. On the "Install the printer driver" screen, choose Brother from the Manufacturer list.

How do I setup my Brother HL l2350dw?

Link your Brother HL L2350DW setup printer to the network of your router or access point. Tap the menu icon on the control panel of the printer. Press the WPS button on your router. Connect your printer and computer to the corresponding network of the router or access point.