Keep them connected to the hub, connect the huns 4 pin header to a motherboard 4 pin header, and use the Asus Suite or Bios to control the hub through that. That will control all of the fans hooked up to the hub. They will all run at the same speed%.

Subsequently, one may also ask, how do you control Phanteks RGB fans?

Out of the box, the fans are set up for RGB control via the buttons on the front of the case, using the built-in RGB controller. To get this working, just plug in a SATA power connector from your PSU to the SATA connector on the cable from the RGB controller.

Subsequently, question is, does Phanteks P500A come with fan controller? Is there an included PWM or fan controller for RGB and fan speed in the P500A? There is no controller included.

Similarly one may ask, does the Phanteks P400A have a fan controller?

The P400A Digital has an DRGB controller embedded in the front panel. There's nothing that needs to be plugged into the motherboard to turn on the fans' lighting.

Can case fans be controlled?

The fans in your computer can get power in one of two ways: From the motherboard, or directly from your computer's power supply. If they're connected to the power supply (usually through a Molex connector), there's no way to control them through software—you'd have to hook them up to a hardware fan controller.

Related Question Answers

Are Phanteks P400A fans PWM?

Fans that come with the case are not PWM. The phanteks hub only works with non pwm 3 pin fans and simulates a pwm setting.

How do I connect my digital RGB fan?

Follow the steps to connect RGB fans to motherboard without headers.
  1. Open the case.
  2. Bring the 4-Pin dual connector.
  3. Now, insert the 4-Pin dual connector to the RGB fan's pin slot cable.
  4. After that, the slot-cable has a way to connect, insert the other remaining end to the RGB fan's controller.

Where do you connect DRGB fans?

If you want motherboard control, then connect MB DRGB to a addressable RGB 5V header on your motherboard. If you want to add additional phanteks DRGB devices then connect those to the unlabeled 3 pin male connector. If you want to add additional non-Phanteks addressable RGB devices then add those to the DRGB fan cable.

What is D-RGB?

DRGB is a new standard introduced by Phanteks. " Digital RGB (AKA addressable-RGB) allows the LEDs in a device to be controlled individually. This is different from having a unique color on each device or having a device's change color in sync.

How do you pair Phanteks fans?

Each of the fans comes with two connectors, one for the fan itself and one for the RGB lighting. You need to connect the D-RGB connectors into either the integrated RGB controller in the case or your motherboard, and you need to plug the 3-pin fan connectors into your motherboard case fan headers.

Can RGB fans be daisy chain?

Two fans connect to a single RGB header via a splitter, while the other header is split between another fan and two RGB strips that are daisy-chained together. Most RGB strips can be daisy-chained (an adaptor to do so is often included), allowing for longer runs in larger cases.

Can I use CPU opt for a case fan?

Can I Connect one of them to the CPU OPT FAN HEADER? yep, all fan headers are the same. You can also get splitters.

Are the P500A fans PWM?

Phantek's SK-PWM fans: New SK series case fans

The new Phanteks SK-PWM fans are optimized for high airflow. They are controlled via PWM signal. The SK housing fans are available in 120 mm and 140 mm sizes. Without RGB lighting they are available individually in black.

What fans does the Phanteks P500A use?

Like the P400A, the P500A comes in both normal and “digital” variants. The base model comes with two 140mm non-RGB fans, the digital version comes with case lighting effects and three 140mm “D-RGB” fans, which is how Phanteks refers to addressable RGB.

How do I control Phanteks P500A RGB?

  1. Fans's rgb is already pre-wired, you just need to connect sata power and "M/B DRGB" cable to a one of 5v-argb header on your mobo.
  2. You can control rgb either via 2 buttons on the case (then you don't need to plug "M/B DRGB" cable) or via mobo's manufacturer software.

Can you daisy chain case fans?

How could you daisy chain PC case fans? Use a molex adapter on the fan with both male and female ends, so you can plug the power supply (female) into one male end of a fan and use the other end (female) for the next fan in the chain.

How do I use Phanteks PWM hub?

For full PWM functionality, Phanteks' PWM hub requires users to connect the 4-pin connector to the “CPU_Fan” connector of the motherboard, because all motherboard manufacturers implements a PWM signal modulation on this connector. Connect the SATA 12V power to power the PWM hub.

How can I speed up my case fan?

Use the arrow keys on your keyboard to scroll through the BIOS menu to the "Monitor," "Status" or other similarly named submenu (this will also vary slightly by manufacturer). Select the "Fan Speed Control" option from the submenu to open the fan controls.

Where do I control my case fans?

You should be able to control the fans as long as they're connected to the motherboard fan headers. The fan settings should be in the Hardware Monitor section in the bios.

How can I make my case fans faster?

How to Make a Computer Fan Faster
  1. Choose "Performance and Maintenance."
  2. Choose the "Power Saver" option.
  3. Locate the scale next to "Cooling Method" and slide it midway to "Performance." This option will utilize the cooling fan to continually keep the computer cool; however, it only slows down the CPU if necessary.

How can I control my case fans without BIOS?

If you are facing a similar issue, you have two ways two control your fans without BIOS.
  1. 1.) Fan Control Software.
  2. 2.) External Fan Controller.
  3. Thermal paste and cooling systems are good for protection, but you can also use an external fan controller and take advantage of the full potential of your fans.

How can I control my fan speed with SpeedFan?

Start SpeedFan, press CONFIGURE button and select the Fan Control tab. Enlarge the window if needed. In the example image we have already created a Fan Controller and called it "CPU Fan Control Strategy". We can create more using the Add button on the right.

How do I control case fans in BIOS?

Follow these steps to view or change system fan control settings:
  1. Press F2 during start to enter BIOS Setup.
  2. Select Advanced > Cooling.
  3. Fan settings are shown in the CPU Fan Header pane.
  4. Press F10 to exit BIOS Setup.

Can afterburner control case fans?

With some bios it's possible to adjust the system's fan speed based on the pc's temperature. You should be able to control your gpu fan using msi afterburner.

How do I control GPU fan speed?

Click the "GPU" icon, and then click the "Cooling" slider control and slide it to a value between zero and 100 percent. The fan slows down or speeds up automatically, depending on your setting.