General Finishes White Poly is a fast drying, pigmented, acrylic-urethane finish. It is formulated for spray application. It's excellent flow and leveling make it ideal for furniture and cabinets.

Also, what is white poly?

Enduro Pigmented White Poly is a high-solids, pigmented water-based wood finish engineered for cabinets and millwork. Use only over General Finishes White Undercoat or Stain Blocker. Stocked in Black and White, custom colors are available to wholesale customers upon request.

Similarly, how do you use a general finishes extender? How To Use General Finishes Extender

  1. Work in a well-ventilated area.
  2. Slowly add 10-15% by volume if allowed by local regulations to lengthen the drying time of GF water-based products. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Rules & Regulations.

Additionally, how do you apply general finishes polyurethane?

Step 2: How To Apply General Finishes High Performance

  1. Hand application: Apply a liberal amount of product using a synthetic bristle brush, foam brush, pad applicator, staining pad or roller such as Whizz or AllPro Velour brand.
  2. Spray application: Before spraying, strain topcoat through a fine-mesh filter.

Can you tint General finishes top coat?

1 Tinting FAQ

Yes, you can. The resin systems for General Finishes Exterior 450 Topcoat and Milk Paint are the same.

Related Question Answers

Is there a white polyurethane?

FORTÉ™ White Polyurethane Topcoat.

How many coats of polyurethane should I use?

two coats

Do you need a top coat with General Finishes Gel Stain?

ANSWER: All stains need a top coat. The beauty of Gel Stain comes from the thick urethane which can carry a LOT of color to any surface, but that color must be sealed in with top coat. An added bonus of top coat is that it also protects the wood from drying out.

Do you need to sand paint before applying polyurethane?

You'll get the best results from your topcoat if you remove any old paint, varnish or other finishes before polyurethane application. For a smooth coating you'll want the surface to be as smooth as possible, so prepare the wood by sanding it with a sanding block or orbital sander.

Is General finishes better than Minwax?

The Minwax Polycrylic was shinier than the other products, while the General Finishes Polyacrylic was the flattest. Minwax's finish was also the least viscous and required more coats to achieve the same build as the other finishes.

How many coats of general finishes gel top coat?

3 coats

Is polyurethane a top coat?

It is arguably the hardest & most durable of all topcoats. And in recent decades polyurethane, or poly (as I'll call it for short), has become the go to topcoat finish for woodworkers everywhere. Nearly every finish & topcoat manufacturer has come up with a poly product for sale.

Does General finishes top coat yellow?

General Finishes background was originally on the professional side, and the incidences of yellowing topcoat over white paint were almost nil, and when our sprayable professional finish, Enduro White Poly, is used, there have been no incidences.

What is the hardest water based polyurethane?

General Finishes QTHS High Performance Water Based Topcoat

A lesser known water-based polyurethane is this variety, produced by General Finishes. It is rated as one of the hardest and most durable polyurethane top coats available.

How do you use general finishes glaze effect?

ALWAYS seal General Finishes Glaze Effects with 3 coats of clear topcoat, e.g. General Finishes High Performance Topcoat. Apply a total of 3+ coats of topcoat altogether. If 1 coat of topcoat is applied before Glaze Effects, add at least 2 more coats over the glaze to seal in the color.

How do you use a glaze extender?

Mix 5% by volume of Extender to Jolie Paint or Jolie Varnish to increase open time and reduce brush marks. Apply with a Jolie Flat Brush or paint sprayer for best results. Allow 2 hours to dry to touch and 16 hours for recoat. Wash tools immediately after use with warm soapy water and rinse clean.

Can you add stain to arm R Seal?

In General Finishes line you can add up to 20% Gel Stain or Oil Base Stain to Arm-R-Seal to deepen the color for toning purposes. Simply stir the stain into the topcoat. Keep stirring during application as solids will settle very quickly when mixed into an oil urethane-based finish.

How do you color water based polyurethane?

A: You can probably achieve something like an amber tone by adding a water-soluble stain or dye to water-based polyurethane. A product called Wizard Tints can be used for this purpose and is available online from Woodworker's Supply (visit and enter “Wizard Tints” in the search space).

Can oil based polyurethane be tinted?

Polyurethane sits on top of wood rather than being absorbed by it. Tinting oil-based polyurethane---before application---provides an even finish over hardwoods. Using the correct type of tint ensures the oil-based polyurethane remains strong after application.

Can you tint General Finishes Gel Stain?

Can Gel Satin Topcoat be tinted with GF's liquid oil based stains? Yes, you could mix up to 20% General Finishes liquid oil stains with General Finishes Gel Satin Topcoat.

What is water based dye?

Water-based Dye Stains penetrate deep into the wood to beautifully magnify the grain. They will provide your project with more depth and color vibrancy than any other wood stain. Dye stains can also be used as a toner when mixed with Water Based Topcoats.

Can you tint oil based stain?

Dye-based tints are most commonly purchased in powder form to be dissolved in water and used with water-based wood stains. However, oil-soluble dye tints are also available for use with oil-based wood stains, so check the packaging carefully to make sure the tint is correct for the stain.